Table of Contents
Advertisement
7700 MultiFrame Manual
7710XUC-HD HD Format Up/Down/Cross Converter
2.
INSTALLATION
The 7710XUC-HD and 7710XUC-AES4-HD modules come with a companion rear plate that occupies two
slots in the frame. The 7710XUDC-AES4-HD also comes with a companion rear plate that occupies three
slots in the frame. For information on mounting the rear plate and inserting the module into the frame see
the 7700FR chapter section 3.
2.1.
VIDEO CONNECTIONS
PGM IN
The input BNC connector for 10-bit serial digital video signals compatible with the
SMPTE 292M or SMPTE 259M standard.
standard or set to automatically detect.
PGM OUT/IN This BNC connector is used to output the converted input video as serial component video,
compatible with the SMPTE 292M standard (i.e. HD only). It can also be configured as an
alternate video input compatible with SMPTE 292M standard using menu system. Only the
7710XUC-HD supports both HD and SD (SMPTE 259M) as an alternate video input.
PGM OUT
This BNC connector is used to output the converted input video as serial component video,
compatible with the SMPTE 292M or SMPTE 259M standard.
7710XUC-HD
-4
Figure 3: Rear Panels
The module can be set to a specific video
Revision 1.0
Advertisement
Table of Contents
