Set The Colour Of The Letterbox Panels; User Aspect Ratio Setting - evertz 7700 Manual

6.4.3. Set the Colour of the Letterbox Panels.

There are three menu items used to set the panel colour. The menu item for each colour component
works in the same way, so for the sake of brevity, only the menu item for the Red component will be
included in this manual.
Scaler
Panel Colour Red
0 to 255

6.4.4. User aspect ratio setting

There are four parameters for each input video standard that set the portion of the input picture that will be
converted. These parameter settings do not have any effect when the pre-defined aspect ratios are used.
Scaler
Input H Start
Input H Stop
Scaler
Input V Start
Input V Stop
There are four parameters for each output video standard that define the size of the output image and how
to place the resulting image on the output video raster.
Scaler
Output H Start
Output H Stop
Scaler
Output V Start
Output V Stop
Changes to any vertical aspect parameters will cause the video output to be
interrupted momentarily. To achieve minimum process delay, the internal timing is
automatically adjusted to achieve the desired aspect settings.
This control defines one of the component colours for the colour of the side
panels. Set the R, G or B value for the side panel colour that you want.
Hint: You can use a standard colour picker such as is available in Microsoft
Paint to determine the colour values that you want to use.
The Input H Start and Input H Stop define the horizontal portion of the input
image to process to the output
The Input V Start and Input V Stop define the vertical portion of the input
image to process to the output
The Output H Start and Output H Stop define how to scale the cropped
input image horizontally and where to place it horizontally on the output
raster. The image will be stretched to fill the width.
For example, for 1080i the range of values is 0 to 1919. The range of
values for 720p output is 0 to 1279.
The Output V Start and Output V Stop define how to scale the cropped
input image vertically and where to place it vertically on the output raster.
The image will be stretched to fill the height.
For example, for 1080i, the range of values is 0 to 1079. The range of
values for 720p output is 0 to 719.
Revision 1.0
7710XUC-HD HD Format Up/Down/Cross Converter
7700 MultiFrame Manual
7710XUC-HD
-29