Setting The Ntsc Setup Pedestal On The Broadcast Analog Video Output; Setting The Ntsc Setup Pedestal On Line 21 Of The Broadcast Analog Video Output; Utilities; Recalling Configurations To The User Presets Or The Factory Preset - evertz 7700 Manual

7700 MultiFrame Manual
7712HDC HD Broadcast Quality Down Converter

6.9.7. Setting the NTSC Setup Pedestal on the Broadcast Analog Video Output

Broadcast Analog
Output
NTSC Setup
Pedestal
Off
On

6.9.8. Setting the NTSC Setup Pedestal on Line 21 of the Broadcast Analog Video Output

Broadcast Analog
Output
Line 21 Setup
Pedestal
Auto
Off

6.10. UTILITIES

The Utilities menus are used to list the module firmware version, upgrade the firmware, and manage the
user presets. The chart below shows the items available in the Utilities menu. Sections 6.10.1 to 6.4.5
give detailed information about each of the parameters.
Recall Preset
Store Preset
Upgrade
Status Window
About...

6.10.1. Recalling Configurations to the User Presets or the Factory Preset

The 7712HDC modules provide ten user preset areas to store the complete set of controls from the on
screen menu.
7712HDC-30
This control determines how the NTSC Setup Pedestal will be applied on
the Broadcast Analog video output. The NTSC setup pedestal should not be
present when operating in Japan.
Set the control to On to apply the Setup pedestal to the active picture
starting.
Set the control to Off to remove the Setup pedestal from the active picture.
This control determines how the NTSC Setup Pedestal will be applied on
line 21 of the Broadcast Analog video output. The NTSC setup pedestal
should not be present when there is an EIA-608 closed caption signal on
line 21.
When the control is set to Auto the Setup pedestal will be added to line 21
when captions are not being encoded. (The Captions item on the VANC
Data Processing menu is set to Off). If captions are being encoded, NTSC
setup will not be added to line 21.
When the control is set to Off the NTSC Setup pedestal will not be added to
line 21.
Used to recall the current module configuration from one of the user presets
or to reset the module to its factory preset condition.
Used to store the current module configuration to one of the user presets.
Used to upgrade the firmware in the module.
Determines whether the module status display will be on or off.
Shows the firmware version of the module.
Revision 1.2