Table of Contents
Advertisement
Quick Links
1.
OVERVIEW ............................................................................................................................1
1.1. SETTING UP THE DDC VALUE ................................................................................................ 3
2.
INSTALLATION .....................................................................................................................4
2.1. OPTICAL CONNECTIONS......................................................................................................... 4
2.2. SIGNAL CONNECTIONS ........................................................................................................... 5
2.3. BNC CONNECTIONS (-C, -C2 & -EO VERSIONS ONLY)........................................................ 5
2.3.1. Interfacing Coaxial/Optical (-EO) Version Cards with an Electrical Router ..................... 6
2.4. CARE AND HANDLING OF OPTICAL FIBER........................................................................... 8
2.4.1. Safety .............................................................................................................................. 8
2.4.2. Assembly......................................................................................................................... 8
2.4.3. Labeling........................................................................................................................... 8
2.4.4. Handling and Connecting Fibers ..................................................................................... 9
3.
SPECIFICATIONS ...............................................................................................................10
3.1. ANALOG VIDEO INPUTS (7707RGBT ONLY)........................................................................ 10
3.2. DIGITAL VIDEO INPUTS ......................................................................................................... 10
3.3. DIGITAL VIDEO CONTROL..................................................................................................... 10
3.4. ANALOG AUDIO INPUTS (A2 & A2KM VERSIONS).............................................................. 10
3.5. KEYBOARD/MOUSE INPUT/OUTPUT (A2KM VERSIONS)................................................... 11
3.6. SERIAL PORT (A2KM VERSIONS)......................................................................................... 11
3.7. USB PORT (USB VERSIONS ONLY) ...................................................................................... 11
3.8. OPTICAL OUTPUT................................................................................................................... 11
3.9. COAXIAL OUTPUT (-C, -C2, -GC AND -EO VERSIONS ONLY) ............................................ 11
3.10. OPTICAL INPUT (-A2KM VERSIONS ONLY) ......................................................................... 11
3.11. COAXIAL INPUT (- C2 & -EO VERSIONS ONLY)................................................................... 11
3.12. ELECTRICAL ........................................................................................................................... 12
3.13. PHYSICAL ................................................................................................................................ 12
4.
CARD-EDGE MONITORING AND CONTROL ....................................................................13
7707RGBT/DVIT DVI and RGB Video/Audio Fiber Transmitter
TABLE OF CONTENTS
Revision 1.6
7700 Multi-Frame Manual
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for evertz 7700
Summary of Contents for evertz 7700
-
Page 1: Table Of Contents
7700 Multi-Frame Manual 7707RGBT/DVIT DVI and RGB Video/Audio Fiber Transmitter TABLE OF CONTENTS OVERVIEW ..........................1 1.1. SETTING UP THE DDC VALUE ....................3 INSTALLATION ........................4 2.1. OPTICAL CONNECTIONS......................4 2.2. SIGNAL CONNECTIONS ......................5 2.3. BNC CONNECTIONS (-C, –C2 & -EO VERSIONS ONLY)............5 2.3.1. - Page 2 7700 Multi-Frame Manual 7707RGBT/DVIT DVI and RGB Video/Audio Fiber Transmitter 4.1. STATUS INDICATOR LEDS ....................14 4.2. CARD-EDGE DISPLAY AND CONTROLS ................14 4.2.1. Card-Edge Display Warning Indications................ 16 4.2.2. Selecting the Output Laser Enable Mode..............16 4.2.3. Setting the RGB Output Video Sharpness (7707RGBT models only)......16 4.2.4.
- Page 3 Sept 09 Information contained in this manual is believed to be accurate and reliable. However, Evertz assumes no responsibility for the use thereof nor for the rights of third parties, which may be affected in any way by the use thereof. Any representations in this document concerning performance of Evertz products are for informational use only and are not warranties of future performance, either expressed or implied.
- Page 4 7700 Multi-Frame Manual 7707RGBT/DVIT DVI and RGB Video/Audio Fiber Transmitter WARNING Never look directly into an optical fiber. Irreversible eye damage can occur in a matter of milliseconds. Do not hook up the 7707RGBT/DVIT DWDM cards directly to companion receivers with short fiber optic cables. The 7707RGBT/DVIT DWDM cards produce +7dBm of power, which will damage the receiver if connected directly.
-
Page 5: Overview
The –GF version provides a fiber optic link and the –GC version provides a coaxial link to transmit an RGB or DVI signal to interface with Evertz MVP or VIP multi-display products using the G-Link protocol. -
Page 6: Figure 1-1: 7707Rgbt Block Diagram
7700 Multi-Frame Manual 7707RGBT/DVIT DVI and RGB Video/Audio Fiber Transmitter Transmit Side Receive Side Fiber Optical/Link Description Type Budget Ordering Product Info Ordering Product Info Power Sensitivity 7707RGBT13-A2KM-USB- 7707RGBR13-A2KM - Multi-Mode < 500m -7dBm -19dBm 1310nm on Tx and Rx fibers... -
Page 7: Setting Up The Ddc Value
7700 Multi-Frame Manual 7707RGBT/DVIT DVI and RGB Video/Audio Fiber Transmitter Tx Out (-C, -C2, -GC, -EO versions) Tx In DVI in (-EO version) OPTICAL Optical TRANSMITTER Output 2 Channel Analog Audio OPTICAL Optical I/O (single COMBINER fiber version) -A2 version... -
Page 8: Installation
1310nm, 1550nm, CWDM (ITU-T G.694.2 compliant) and DWDM (ITU G.694.1 compliant) wavelengths. This connector is compatible with multimode fiber when connected directly to a companion 7707RGBR/DVIR receiver. The output signal on the 7707RGBT/DVIT-GF will be in the G-Link format for connection to Evertz MVP multi-display products. FIBER INPUT (F2 Versions): There is one SC/PC (shown), ST/PC, or FC/PC female connector when the 7707RGBT/DVIT is equipped with an optical input. -
Page 9: Signal Connections
DB-15 to DVI-I adapter such as the Belkin F2E4162, or appropriately terminated cable assembly such as the Amp 16539332-1. When making digital DVI connections, Evertz recommends using only high quality DVI cables, no longer than 6 feet (1.8m). AUDIO INPUTS (A2 & A2KM Versions):... -
Page 10: Interfacing Coaxial/Optical (-Eo) Version Cards With An Electrical Router
7700 Multi-Frame Manual 7707RGBT/DVIT DVI and RGB Video/Audio Fiber Transmitter Tx OUT (-EO Versions): BNC connector for the electrical bypass output of the 7707RGBT/DVIT optical output (see Figure 1-1). This port should be connected to the Tx IN port of another 7707RGBT/DVIT card and may be switched using a 3.125Gb/s capable electrical router. -
Page 11: Figure 2-2: 7707Rgbt/Dvit Unidirectional Electrical Router Interface - Sample Configuration
7700 Multi-Frame Manual 7707RGBT/DVIT DVI and RGB Video/Audio Fiber Transmitter Tx Out Tx In 7707RGBT OPTICAL Optical Internal 7707RGBR/ TRANSMITTER Output Circuitry DVIR 7707RGBT/DVIT Tx Out Tx In 7707RGBT OPTICAL Optical Internal 7707RGBR/ TRANSMITTER Output Circuitry DVIR 7707RGBT/DVIT Tx Out... -
Page 12: Care And Handling Of Optical Fiber
Triangular band: black Symbol: black 2.4.2. Assembly Assembly or repair of the laser sub-module is performed only at the Evertz facility by qualified Evertz technical personnel. 2.4.3. Labeling Certification and Identification labels are combined into one label. As there is not enough room on the product to place the label, it is reproduced here in the manuals. -
Page 13: Handling And Connecting Fibers
The transmission characteristics of the fiber are dependent on the shape of the optical core and therefore care must be taken to prevent fiber damage caused by heavy objects or abrupt fiber bending. Evertz recommends that you maintain a minimum bending radius of 5 cm to avoid fiber-bending loss that will decrease the maximum attainable distance of the fiber cable. -
Page 14: Specifications
7700 Multi-Frame Manual 7707RGBT/DVIT DVI and RGB Video/Audio Fiber Transmitter SPECIFICATIONS Video and audio performance specifications are measured at the output of a companion 7707RGBR/DVIR Receiver. 3.1. ANALOG VIDEO INPUTS (7707RGBT ONLY) Number of Signals: Signal Type: Sync Type: H and V, or Sync on Green... -
Page 15: Keyboard/Mouse Input/Output (A2Km Versions)
7700 Multi-Frame Manual 7707RGBT/DVIT DVI and RGB Video/Audio Fiber Transmitter 3.5. KEYBOARD/MOUSE INPUT/OUTPUT (A2KM VERSIONS) Number: Connector: 1 PS2 each for keyboard and mouse 3.6. SERIAL PORT (A2KM VERSIONS) Standard: RS232 or RS422 (user selectable) Number: Connector: DB9F 3.7. USB PORT (USB VERSIONS ONLY) Standard: USB 1.1... -
Page 16: Electrical
7707RGBT/DVIT DVI and RGB Video/Audio Fiber Transmitter 3.12. ELECTRICAL Voltage: 12V DC (nominal) Power: Non DWDM Laser: 11 Watts (max) DWDM Laser: 14 Watts (max) 3.13. PHYSICAL 7700 or 7701 frame mounting: Number of Slots Model 7707RGBT/DVIT13 7707RGBT/DVIT13-A2 7707RGBT/DVIT-C 7707RGBT/DVIT-A2-C 7707RGBT/DVIT-GC 7707RGBT/DVIT-A2-GC 7707RGBT/DVIT-GF... -
Page 17: Card-Edge Monitoring And Control
7700 Multi-Frame Manual 7707RGBT/DVIT DVI and RGB Video/Audio Fiber Transmitter CARD-EDGE MONITORING AND CONTROL The 7707RGBT/DVIT has four LED status indicators and a four-digit dot-matrix display on the front card- edge to show the card’s operational status at a glance. The card-edge pushbutton and toggle switch are used to select various control and status indicators on the dot-matrix display. -
Page 18: Status Indicator Leds
7700 Multi-Frame Manual 7707RGBT/DVIT DVI and RGB Video/Audio Fiber Transmitter 4.1. STATUS INDICATOR LEDS LOCAL FAULT: This red LED indicates poor module health. Several conditions could cause this fault indication to be active: o The output laser is disabled (see section 4.2.4) -
Page 19: Figure 4-2: 7707Rgbt/Dvit Card Edge Menu Flow Cart
7700 Multi-Frame Manual 7707RGBT/DVIT DVI and RGB Video/Audio Fiber Transmitter Pushbutton Menu Level 1 Menu Level 2 Menu Level 3 Indications LASR...ERR (Laser Error) Supersedes TYPE...ERR (Input Error) Supersedes LINK...LOSS (No optical Link) Supersedes OK (Ay-okay) Selections Selections CONT (Continuous) -
Page 20: Card-Edge Display Warning Indications
7700 Multi-Frame Manual 7707RGBT/DVIT DVI and RGB Video/Audio Fiber Transmitter 4.2.1. Card-Edge Display Warning Indications There are flashing warning indicators that may appear on the display of the 7707RGBT. These warning indicators can overwrite other displayed text. Pressing the pushbutton will clear a warning indicator from the display and will allow access to other menu items. -
Page 21: Setting The Analog Audio Detection Threshold (A2 & A2Km Versions Only)
7700 Multi-Frame Manual 7707RGBT/DVIT DVI and RGB Video/Audio Fiber Transmitter 4.2.4. Setting the Analog Audio Detection Threshold (A2 & A2KM Versions Only) Two card-edge LEDs indicate signal presence of the two respective analog audio channels. A detection threshold is used to indicate audio signal presence. -
Page 22: Adjusting The Headphone Jack Volume (A2 & A2Km Versions Only)
7700 Multi-Frame Manual 7707RGBT/DVIT DVI and RGB Video/Audio Fiber Transmitter 4.2.6. Adjusting the Headphone Jack Volume (A2 & A2KM Versions Only) The 7707RGBT/DVIT provides a convenient audio monitoring headphone jack at the card-edge. This jack can be used to verify signal presence or content for each audio channel. The headphone jack volume can be adjusted via the card-edge interface. -
Page 23: Setting The Orientation Of The Text On The Card Edge Display
7700 Multi-Frame Manual 7707RGBT/DVIT DVI and RGB Video/Audio Fiber Transmitter 4.2.9. Setting the Orientation of the Text on the Card Edge Display The DISP option allows the user to set a horizontal or vertical orientation for the card edge display. -
Page 24: Displaying The Firmware Version
7700 Multi-Frame Manual 7707RGBT/DVIT DVI and RGB Video/Audio Fiber Transmitter 4.2.13. Displaying the Firmware Version STAT The VER option displays the card’s current firmware version. To display the firmware version, select the STAT menu item in the first menu level then use... -
Page 25: Jumper Controls
7700 Multi-Frame Manual 7707RGBT/DVIT DVI and RGB Video/Audio Fiber Transmitter JUMPER CONTROLS Several jumpers (located at the front of the module) are used to preset various operating modes. Figure 4-1 shows the locations of the jumpers. 5.1. SELECTING WHETHER LOCAL FAULTS WILL BE MONITORED... -
Page 26: Vistalink ® Remote Monitoring/Control
1. An SNMP manager, also known as a Network Management System (NMS), is a computer running special software that communicates with the devices in the network. Evertz VL-Fiber demo Manager graphical user interface (GUI), third party or custom manager software may be used to monitor and control Evertz VistaLINK enabled fiber optic products. -
Page 27: Vista Link ® Controlled Parameters
7700 Multi-Frame Manual 7707RGBT/DVIT DVI and RGB Video/Audio Fiber Transmitter 6.3. LINK CONTROLLED PARAMETERS ISTA ® When the CONTROL jumper is set to the REMOTE position, the following parameters can be remotely controlled through the VistaLINK interface. When the MASTER jumper is set to the LOCAL position the ®... - Page 28 7700 Multi-Frame Manual 7707RGBT/DVIT DVI and RGB Video/Audio Fiber Transmitter This page left intentionally blank Page - 24 Revision 1.6...
Need help?
Do you have a question about the 7700 and is the answer not in the manual?
Questions and answers