Setting The Aspect Ratio Of The Output Picture - evertz 7700 Manual

7700 MultiFrame Manual
7710XUC-HD HD Format Up/Down/Cross Converter

6.4.2. Setting the Aspect Ratio of the Output Picture

The Aspect Ratio menu sets the user image conversion parameters to pre-defined values. Once selected,
the user can fine-adjust the picture parameters via the input and output H and V start and stop menus.
Note: In order to modify the user image conversion parameters, the Aspect Ratio needs to
be set to User Aspect.
Scaler
AR
Full raster
User Aspect
4:3 Side Panel to 16:9 TB Cut
13:9 Letter Box to 16:9 TB Cut
14:9 Letter Box to 16:9 TB Cut
13:9 Stretch to 16:9 TB Cut
14:9 Stretch to 16:9 TB Cut
16:9 Stretch to 16:9 TB Cut
13:9 Stretch to 4:3 Side Panel
14:9 Stretch to 4:3 Side Panel
16:9 Stretch to 4:3 Side Panel
4:3 to 4:3 Side Panel on 16:9
4:3 to 13:9 Stretch on 16:9
4:3 to 14:9 Stretch on 16:9
4:3 to 16:9 Stretch on 16:9
4:3 to 13:9 Crop on 16:9
4:3 to 14:9 Crop on 16:9
4:3 to 16:9 Crop on 16:9
16:9 to 16:9 Letter Box on 4:3
16:9 to 14:9 Letter Box on 4:3
16:9 to 13:9 Letter Box on 4:3
16:9 to 4:3 Side Cut on 4:3
16:9 to 4:3 Squeeze on 4:3
7710XUC-HD
-28
Full Raster - converts the full input raster to full output raster.
If the input and output aspect ratios are not equivalent there
will be aspect distortion.
User Aspect – converts the region of the input raster defined
by the Input H & V Start and Stop values to the region of the
output raster defined by the Output H & V Start and Stop
values with colored side panels.
These settings convert the input picture to 16:9 top and
bottom cuts.
These settings squeeze common stretched input video back
to 4:3 side panel images on a 16:9 aspect raster.
These settings are common up-converter settings for
converting 4:3 aspect ratio images to common 16:9 formats.
These settings are not appropriate for cross- or down-
conversion.
These settings are common down-converter settings for
converting 16:9 aspect ratio images to common 4:3 formats.
These settings are not appropriate for cross- or up-
conversion.
Revision 1.0