Table of Contents
Advertisement
7700 MultiFrame Manual
7737CE Composite Encoder with Image Enhancement
6.9.
UTILITIES
6.9.1. Accessing Information About this Module and its Firmware
Utilities
About...
6.9.2. Saving And Recalling Configurations
The module provide two user preset areas to save the complete set of control from the on screen menu.
The Store preset and Recall preset menu items are used to save and recall these configurations.
For simplicity the following sections of the manual show how to store and recall from Preset 1 only.
6.9.2.1. Storing Configurations to the User Presets
Utilities
Store preset 1
Store
Cancel
6.9.2.2. Recall Configurations from the User Presets
Utilities
Recall preset 1
Recall,
Cancel
7737CE-28
This menu item list the particulars about this module and the firmware
residing within it. It gives quick access to information about revisions
that can be used to determine when upgrades are required.
This control is used to initiate a store of the current card
configuration into one of the user presets
After selecting the store preset operation, you must change the
command to Store and press the pushbutton before the store
will take place. You can abort the operation by pressing the
pushbutton when Cancel is displayed.
This control is used to initiate a recall of the current card configuration
from one of the user presets
After selecting the recall preset operation, you must change the
command to Recall and press the pushbutton before the store will take
place. You can abort the operation by pressing the pushbutton when
Cancel is displayed.
Warning: there will be a slight disturbance in the operation of the card
and the on-screen display while the new preset is being recalled.
Warning: the current state of the card will be forgotten if it has not
been saved to a preset before a recall is performed.
Revision 1.0
Advertisement
Table of Contents
