Utilities; Recalling Configurations To The User Presets Or The Factory Preset; Saving Configurations To The User Presets - evertz 7700 Manual

Hd broadcast quality down converter
Hide thumbs Also See for 7700:
Table of Contents

Advertisement

6.11. UTILITIES

The Utilities menus are used to list the module firmware version, upgrade the firmware, and manage the
user presets. The chart below shows the items available in the Utilities menu. Sections 6.11.1 to 6.10.3
provide detailed information about each of the parameters.
Recall Preset
Store Preset
Upgrade
About...

6.11.1. Recalling Configurations to the User Presets or the Factory Preset

The 7711HDC modules provide ten user preset areas to store the complete set of controls from the on
screen menu.
Utilities
Recall preset
Cancel
Factory
1 to 10
The current state of the card will be forgotten if it has not been saved to a preset
before a recall is performed.
There will be a slight disturbance in the operation of the card and the on-screen
display while the new preset is being recalled.

6.11.2. Saving Configurations to the User Presets

The 7711HDC modules provide ten user preset areas to store the complete set of controls from the on
screen menu.
Utilities
Store Preset
Cancel
1 to 10
Used to recall the current module configuration from one of the user presets
or to reset the module to its factory preset condition.
Used to store the current module configuration to one of the user presets.
Used to upgrade the firmware in the module.
Shows the firmware version of the module.
This control is used to initiate a recall of the current card configuration from
one of the user presets or from the factory preset.
Use the toggle switch to select the preset you wish to recall. After selecting
the preset, you must press the pushbutton before the recall will take place.
You can abort the operation by pressing the pushbutton when Cancel is
displayed.
This control is used to initiate a store of the current card configuration into
one of the user presets.
Use the toggle switch to select the preset location where you want to store
the module configuration. After selecting the preset, you must press the
pushbutton before the store will take place. You can abort the operation by
pressing the pushbutton when Cancel is displayed.
Revision 1.1
7711HDC HD Broadcast Quality Down Converter
7700 MultiFrame Manual
7711HDC - 33

Advertisement

Table of Contents
loading

This manual is also suitable for:

7711hdc

Table of Contents