Table of Contents
Advertisement
7700 MultiFrame Manual
7714HDC High Quality Down Converter
6.10. UTILITIES
The Utilities menu items are used to list the module firmware version, upgrade the firmware, and manage
the user presets. The chart below shows the items available in the Utilities menu. Sections 6.10.1 to
6.10.6 give detailed information about each of the parameters.
Recall Preset
Store Preset
Auto Recall Presets
Upgrade
Status WIndow
GPI 1
GPI 2
About...
6.10.1. Storing and Recalling Configurations to the User Presets or the Factory Preset
The down converter provides ten user preset areas to store the complete set of controls from the on
screen menu.
The current state of the card will be forgotten if it has not been saved to a preset
before a recall is performed.
There will be a slight disturbance in the operation of the card and the on-screen
display while the new preset is being recalled.
6.10.1.1. Recalling Configurations from the User Presets
Utilities
Recall Preset
Cancel
Factory
1 to 10
7714HDC - 34
Used to recall the current module configuration from one of the user presets
or to reset the module to its factory preset condition.
Used to store the current module configuration to one of the user presets.
Used to enable or disable the default parameter recall.
Used to upgrade the firmware in the module.
Enable or Disable display of the status screen.
Selects the function of GPI1 - Recall Preset 1-10/OFF.
Selects the function of GPI2 - Recall Preset 1-10/OFF
Shows the firmware version of the module.
This control is used to initiate a recall of the current card configuration from
one of the user presets.
Use the toggle switch to select the preset location where you want to recall
the module configuration. After selecting the preset, you must press the
pushbutton before the store will take place. You can abort the operation by
pressing the pushbutton when Cancel is displayed.
Revision 1.1
Advertisement
Table of Contents
