Saving User Presets; Recalling User Presets; Customizing The User Preset Names - evertz HD9690 Series Instruction Manual

3.10.1. Saving User Presets

To save the current object settings into one of the ten user preset memory locations, press the
PRESET SAVE button.
USER PRESET button corresponding to the location you wish to store the settings to. The Front panel
display will show SAVE to store n where n is the number of the user preset.
PRESET SAVE button a second time to confirm the operation (The Front panel display will show
Preset n stored) or press the ESC button to abort the store operation. If the user attempts to store a
preset into a write protected location the front panel will display the message Preset n locked.

User Presets cannot be deleted directly from memory they can only be overwritten
by another configuration saved to the same memory location.

3.10.2. Recalling User Presets

To load the current object settings from one of the ten user preset memory locations; press the
USER PRESET button corresponding to the location you wish to restore the settings from.

Recalling one of the user presets will overwrite the current object settings and can
not be undone. Make sure you want to overwrite your current settings before you
recall one of the user presets

User presets cannot be recalled if the keyer is off.

3.10.3. Customizing the User Preset Names

The User presets can be uploaded to a computer text file using the Ethernet port. You can edit this text
file giving each of the presets a more 'user friendly' name, and then download the file back to the Graticule
generator. The names that you have assigned will be shown on the front panel when you recall the user
presets using the procedure in section 3.10.2. You can also download this user preset file to multiple
Graticule generators to pre configure them with your customized preset settings. See section 5.4 for
information on uploading and downloading user presets.
FRONT PANEL OPERATION
HD9690 Series HDTV Graticule Generator Manual
The Front panel display will show Store Preset #.
Revision 1.5
Then press the
Press the
Page 3-27