Table of Contents
Advertisement
6.11.10.
Setting the Chroma Filter Bandwidth
Composite Output
Chroma Filter
Selection
650kHz,
1.0Mhz,
1.3MHz,
2.0MHz,
3.0MHz
6.12. UTILITIES
The Utilities menus are used to list the module firmware version, upgrade the firmware, and manage the
user presets. The chart below shows the items available in the Utilities menu. Sections 0to 6.12.7 give
detailed information about each of the parameters.
Load Preset
Store Preset
Auto Recall Presets
GPI 1
GPI 2
GPI 3
GPI 4
GPI 4 Function
Upgrade
Status Window
About...
6.12.1. Storing and Recalling Configurations to the User Presets or the Factory Preset
The converter modules provide ten user preset areas to store the complete set of controls from the on
screen menu.
The Cb and Cr channels may be filtered with any of these bandwidths.
Recalls the current module configuration from one of the user presets, to
reset the module to its default factory condition, or to configure the module
to a pre-defined factory condition.
Stores the current module configuration to one of the user presets.
Enables or disables the abilitity of the module to recall a configuration based
on an input video standard – output video standard combination.
Selects the function of GPI1 - Recall Preset 1-10/OFF
Selects the function of GPI2 - Recall Preset 1-10/OFF
Selects the function of GPI3 - Recall Preset 1-10/OFF
Selects the function of GPI4 - Recall Preset 1-10/OFF
Configures the function of GPI 4 (7710XUC-HD only)
Upgrades the firmware in the module
Enable or Disable display of the status screen
Shows the firmware version of the module
Revision 1.0
7710XUC-HD HD Format Up/Down/Cross Converter
7700 MultiFrame Manual
7710XUC-HD
-45
Advertisement
Table of Contents
