Table of Contents
Advertisement
9625LG Series Logo Inserters and Media Keyers Manual
Pressing the QUICK SELECT button once fades the assigned media item in. Pressing the
QUICK SELECT button once again fades the assigned media item out. When a Quick
Select is active the button will be illuminated. To assign a media item to a Quick Select,
scroll to the media item in the display window using the SHAFT ENCODER. Then press
and hold the desired QUICK SELECT button for 3 seconds. Remember to press the SHIFT
LOCK button first to access the higher numbered Quick Selects. Release the button and
the item is assigned to the button.
SHIFT LOCK To access the second bank of Quick Selects press the SHIFT LOCK button. The SHIFT
LOCK button LED will be illuminated to indicate that Shift Lock is on and that the higher
numbered Quick Selects are available. To turn Shift Lock off press the SHIFT LOCK button
once again. The SHIFT LOCK button LED will be extinguished to indicate that Shift Lock is
off and that the lower numbered Quick Selects are available.
4.1.3. The Function Button Group
PANEL LOCK
This button will lock the front panel controls so that changes cannot be made.
The PANEL LOCK button LED will be illuminated indicating that the control panel buttons
are disabled. When any of these buttons are pressed, the front panel display will show the
message Panel Locked for a few seconds. Pressing the PANEL LOCK button again will
return the control panel keys to their normal functions and the PANEL LOCK button LED
will be extinguished indicating that the front panel controls are active.
The 9625LG Series Keyers may still be controlled from the GPI inputs or the
!
automation when the front panel is Locked.
VOICE OVER This button (only available on the Media Keyer units) will mix the Voice Over audio with
the background (program) audio. The HTML Audio Setup page is used to configure which
inputs will be treated as background audio and which inputs are treated as Voice Over
Audio. (See section 3.11.1)
BYPASS This button controls the bypass relays (optional on high definition units). The BYPASS
button LED will be illuminated to indicate that the unit is in manual Bypass mode. When the
unit is in Bypass mode, the program input video is directly connected to the FILL video
output. On the Media Keyers, the AES PROG inputs are directly connected to the AES
PROG outputs. The other outputs will not have any signals on them. The unit will revert to
Bypass mode in the event of a power loss.
4.1.4. Shaft Encoder Knob
SHAFT ENCODER
When the 9625LG Series Keyer is in one of the Setup menus, the SHAFT
ENCODER knob is used to move to various items in the menu system or change a menu
item's parameter value. (Also, see section 3.2)
When the 9625LG Series Keyer is not in one of the Setup menus, the SHAFT ENCODER
knob is used to select logos and audio clips that are stored in the file system. When the
desired logo or audio clip is shown on the display, press the SELECT button to fade in the
logo or play the audio clip.
Page 4-4
Revision 4.2
DESKTOP CONTROL PANEL
Advertisement
Table of Contents
