Setting The Colours For The Eas Crawl Display - evertz 9625LG Instruction Manual

9625LG Series Logo Inserters and Media Keyers Manual

3.9.6. Setting the Colours for the EAS Crawl Display

There are three different levels of EAS messages – warning messages, watch messages and test
messages. Each message typically has a different background and foreground colour associated with
it so that the viewer will immediately know the severity of the EAS alert. There are six menu items used
to set the foreground and background colours. For the sake of simplicity only the menu item for setting
the warning background colour will be shown in the manual. The other menu items are used in the
same way.
EAS
Warning BG
R:255G: 0 G: 0
Page 3-26
This menu item is used to set the background colour for the warning
messages. When you first enter this menu item you will be shown a set of
colour values for each of the RGB colour components. The display will
look similar to the following:
R:255 G: 0 G:
To change the colour value, press the SELECT button. The colon (:) after
the R will change to an equals (=) sign indicating that you can change the
R value. Use the
value. When you press the SELECT button the colon after the G will
change to an equals sign indicating that you can change the G value.
Proceed to set the G and B values in the same way. After changing the B
value, press the SELECT button and the display will show something like:
R:255 G:128 G:128
This indicates that the warning background value has been changed.
Revision 4.2
0
or buttons to change the red colour component
OPERATION