Table of Contents
Advertisement
9625LG Series Logo Inserters and Media Keyers Manual
3.5.
FRONT PANEL SETUP MENU – MAIN MENU
The Front panel Setup menu is arranged in a layered structure that groups similar configuration items
together. The following section provides a brief description of the first level of menus that appear when
you enter the menu. Selecting one of these items will take you to the next menu level. Sections 3.6 to
3.10 provide detailed descriptions of each of the sub-menus. The tables in these sections are arranged
in an indented structure to indicate the path taken to reach the control. Menu items or parameters that
are underlined indicate the factory default values.
GENERAL
MANAGE FILES
PRESET
EAS
MEDIA
Audio Over Trans
Temperature
Page 3-8
This menu is used to set up the video standard, COM ports, network address,
time and other miscellaneous settings. It is also used to update firmware.
This menu is used to manage logos and other media files – to copy them from
one media device to another, to delete them, etc.
This menu is used to configure the General Purpose inputs and outputs
This menu is used to configure the EAS crawl functions – speed, position, font
type and height, and colours (only on EAS optioned units)
This menu is used to position logos and to set their fade in, hold and fade out
time
This menu is used to set the voice over transition fade in and fade out rates.
(Media Keyers only)
This menu is used to configure parameters relating to the temperature, which is
displayed in a temperature logo.
Revision 4.2
OPERATION
Advertisement
Table of Contents
