Table of Contents
Advertisement
9625LG Series Logo Inserters and Media Keyers Manual
The 9625LG Series Keyers may still be controlled from the GPI inputs or the
!
automation when the front panel is Locked.
VOICE OVER
This button (only available on the Media Keyer units) will mix the Voice over
audio with the background (program) audio. The HTML Audio Setup page is used to
configure which inputs will be treated as background audio and which inputs are treated as
Voice Over Audio. (See section 3.11.1)
BYPASS This button controls the bypass relays (optional on high definition units). The LED indicates
that the unit is in manual Bypass mode when it is On. When the unit is in Bypass mode, the
program input video is directly connected to the FILL video output. On the Media Keyers,
the AES PROG inputs are directly connected to the AES PROG outputs. The other outputs
will not have any signals on them. The unit will revert to Bypass mode in the event of a
power loss also.
3.1.4. Setup Button Group
SETUP
This button is used to enter Setup menu that is used to configure the operating modes of the
9625LG Series Keyer. (See section 3.3 for an overview of the Setup menu.) When you are
in the Setup menu, this button is also used to back out of menu selections to the next higher
menu level or to exit the Setup menu and return to normal panel operation.
SELECT When in the Setup menu, this button is used to choose a submenu and navigate to the next
level down in the menu structure. When you are at the bottom level of the menu system it
can also accept numeric values to make the displayed menu choice the active value for that
menu item. When not in the Setup menu, this button is also used to fade logos in and out
on the selected output buss. (See section 3.1.1)
,
When in the Setup menu, the
current menu level in the menu system. The
numeric values for menu choices at the bottom level of the menu system.
When not in the Setup menu, the
3.1.5. Control Panel Status Indicators
3.1.5.1.
Fade Status Indicators
CUE
This LED indicates that the media item displayed on the front panel is loaded into memory
and available on the Preview output buss.
IN
This LED indicates that the media item displayed on the front panel is faded in and available
on the Program output buss. The media item name will also be flashing.
Page 3-4
and
arrow keys are used to move to various items at the
and
and
arrow keys are used to select a logo to display.
Revision 4.2
arrow keys are also used to enter
OPERATION
Advertisement
Table of Contents
