Table of Contents
Advertisement
3.8.
PRESET CONFIGURATION ITEMS
The PRESET Setup menu is used to configure the GPI and GPO functions. Table 3-3 shows the items
available in the PRESET Setup menu. Section 3.8.1 and 3.8.2 provide detailed information about the
sub-menus.
GPI Setup
GPO Setup
3.8.1. Configuring the GPI Inputs
The 9625LG Series Keyer is fitted with 8 general purpose inputs (GPIs) that can be configured to
trigger 2 different actions for a specific media item - On Closure and On Open. For example, the On
Closure event can be used to fade in a logo to the program output. The On Open event for the same
GPI can be used to fade out the same logo.
3.8.1.1.
Selecting One of the GPI Inputs to Configure
PRESET
GPI Setup
GPI:A
GPI=A to H
3.8.1.2.
Configuring the GPI Actions
There is one menu item to configure what happens when the selected GPI closes (CAction), one menu
item to configure what happens when the selected GPI opens (OAction), and one menu item to select a
media item affected by the GPI (Logo). For the sake of simplicity only the CAction and Logo menu
items will be shown in the manual. The OAction menu item operates the same as the CAction. The
applicable GPI is shown on the left of the front panel display.
configured by first selecting the GPI using the GPI menu item described in section 3.8.1.1.
OPERATION
9625LG Series Logo Inserters and Media Keyers Manual
Configures the actions triggered by the GPI inputs
Configures the conditions that will trigger the GPO outputs
Table 3-3: Top Level of the Preset Setup Menu
This menu item is used to select one of the GPI inputs that will be
configured using the other menu items in the GPI SETUP menu branch.
When you first enter this menu branch the selected GPI input will be
shown. To change to configure another GPI input, press the SELECT
button. The display will show GPI=A indicating that the GPI input can be
changed. Use the
configure and press the SELECT button. You can configure the media file
to be affected when the selected GPI input is closed and opened using the
other menu items in the GPI SETUP menu branch.
Revision 4.2
or
buttons to select the GPI input you wish to
Each GPI can be independently
Page 3-21
Advertisement
Table of Contents
