The Quick Select Button Group; The Function Button Group - evertz 9625LG Instruction Manual

SELECT When you are not in the Setup Menu, this button controls whether the selected media item
shown on the front panel display is present on the Program output buss. Scroll to the media
item required using the
flash in the front panel display and the IN LED will be On. To fade the media item in, press
the SELECT button. The media item will fade in according to its programmed fade in time
and the media item name display will begin flashing. If the media item is not currently
loaded into memory, a progress indicator will appear to the right of the logo name while it is
loading into memory. To remove a media item from the output video busses, press the
SELECT button when the media item name is flashing. The media item will fade out
according to its programmed fade out time and its name display will stop flashing.

3.1.2. The Quick Select Button Group

QUICK SELECT These buttons are used as a quick method to fade in and out often used media
items. On the Logo Inserters you can access up to 10 logos using the quick select keys.
On the Media Keyers you can access up to 8 media items. Each button can access two
different media items depending on the state of the SHIFT LOCK LED. When the SHIFT
LOCK LED is Off, the QUICK SELECT button access the lower numbered Quick Select.
When the SHIFT LOCK LED is On the QUICK SELECT button access the higher numbered
Quick Select.
Pressing the QUICK SELECT button once fades the assigned media item in. Pressing the
QUICK SELECT button once again fades the assigned media item out. When a Quick
Select is active the LED above the button is On. The LED's above each button are used to
indicate the status of two Quick Selects.
To assign a media item to a Quick Select, scroll to the media item in the display window
using the
seconds. Remember to press the SHIFT LOCK button first to access the higher numbered
Quick Selects. Release the button and the item is assigned to the button.
SHIFT LOCK To access the second bank of Quick Selects press the SHIFT LOCK button. The
LED to the left of the button is On to indicate that Shift Lock is on and that the higher
numbered Quick Selects are available. To turn Shift Lock off press the SHIFT LOCK button
once again. The LED to the left of the button is Off to indicate that Shift Lock is off and that
the lower numbered Quick Selects are available.

3.1.3. The Function Button Group

PANEL LOCK This button will lock the front panel controls so that changes cannot be made.
The PANEL LOCK LED will turn On indicating that the front panel buttons are disabled.
When any of these buttons are pressed, the front panel display will show the message
Panel Locked for a few seconds. Pressing the PANEL LOCK button again will return the
front panel keys to their normal functions and the LED key will go Off indicating that the front
panel controls are active.
OPERATION
9625LG Series Logo Inserters and Media Keyers Manual
& buttons. If the media item is currently faded in its name will
& buttons. Then press and hold the desired QUICK SELECT button for 3
Revision 4.2
Page 3-3