Table of Contents
Advertisement
3.6.3.1.
Displaying the Local Time
GENERAL
Time Setup
Local 12:34:50
3.6.3.2.
Displaying the UTC Time
GENERAL
Time Setup
UTC 12:34:50
3.6.3.3.
Setting the Real Time Clock
GENERAL
Time Setup
RTC 12:34:50
When there is a valid LTC input to the 9625LG Series Keyer, the LTC time will
overwrite the Real Time clock that has been entered.
OPERATION
9625LG Series Logo Inserters and Media Keyers Manual
This menu item is used to display the clock time as local time. (UTC time
adjusted for the time zone offset and DST adjustment) The time displays
are always shown in the 24-hour time format.
This menu item is used to display the UTC time clock. The time displays
are always shown in the 24-hour time format.
This menu item is used to display and set the hardware real time clock in
the 9625LG Series Keyer. The time displays are always shown in the 24-
hour time format.
When you press the SELECT button, the display shows the current real
time clock time which will look similar to the following:
12:34:50
To set the real time clock press the SELECT button and the hours digits
will be flashing to indicate that they are in entry mode. Use the
buttons to change the hours to the desired value. Then press the SELECT
button and the minutes digits will be flashing to indicate that they are in
entry mode. Set the minutes and seconds in the same way. When you
have entered the correct time, press the SELECT button to update the
hardware real time clock. The seconds digits will stop flashing and the time
will begin incrementing indicating that the Real Time Clock has been set.
When you set the hardware real time clock the UTC clock time will
automatically be adjusted.
Revision 4.2
or
Page 3-11
Advertisement
Table of Contents
