Table of Contents
Advertisement
5.3.
TESTING THE SYSTEM
Please ensure all output video from the 9625LG Series Keyer is out of your on-air
broadcast path for this test.
5.3.1. Testing The Sage Decoder
On the Sage decoder.
1) Press Week
2) Enter Password
3) Press Enter
The video monitor should now show a scrolling EAS weekly test message. If you do not see the test
message, double check your video connections, ensure that you have the correct video standard
selected in the 9625LG Series Keyer. Double check that you have configured the correct Sage port
and the correct Device Type for the correct port and that the serial cable is valid and connected to the
correct ports. Check the Evertz Web site at
9625LG Series Keyer. Check that you are running the most up to date firmware in your Sage decoder
at www.broadcast.harris.com.
Evertz tested this configuration with the Sage decoder model 1822 with firmware version 5.111.
5.3.2. Testing The TFT Decoder
On the TFT decoder
1) Press Weekly Test button
The monitor should now show a scrolling EAS weekly test message. If you do not see the test
message, double check your video connections, and ensure that you have the correct video standard
selected in the 9625LG Series Keyer. Double check that you have configured the correct CG Interface
Type and that the serial cable is valid and connected to the correct ports. Check the Evertz Web site at
www.evertz.com
for any new firmware releases for the 9625LG Series Keyer. Check that you are
running the most up-to-date firmware in your TFT decoder Phone: 1-800-347-3383.
Evertz tested this configuration with the TFT decoder model EAS 911 with firmware version T.838
EAS
9625LG Series Logo Inserters and Media Keyers Manual
www.evertz.com
Revision 4.2
for any new firmware releases for the
Page 5-5
Advertisement
Table of Contents
