Table of Contents
Advertisement
3.6.
GENERAL CONFIGURATION ITEMS
The GENERAL Setup menu is used to set up various items related to the overall operation of the
9625LG Series Keyer, such as Video standard, Time settings, Network info, COM port settings and
firmware versions. Table 3-1 shows the items available in the GENERAL Setup menu. Sections 3.6.1
to 3.6.9 provide detailed information about each of the sub-menus.
Select Standard
Reference Setup
Update Code
Output Mode
Time Setup
Network Info
Serial Control
COM D
COM E (net)
Line 21 Protect
Up Down Timer
Automation Debug
M2100 Auto Debug
3.6.1. Selecting the Video Standard
GENERAL
Select Standard
525I
16x9 525I
625I
OPERATION
9625LG Series Logo Inserters and Media Keyers Manual
Sets the video standard
Selects whether the timing reference will be the Input video or Genlock
Displays the current firmware version and initiates firmware upgrades
Selects the Logo Insert or Logo Key and Fill mode
Configures the real time clock and LTC timecode input
Configures the Ethernet Network Address for FTP uploads
Configures the function of the SERIAL CONTROL C serial Port
Configures the function of the COM D serial Port
Configures the function of the virtual serial port (COM E)
Controls whether logos can be placed on Line 21
Configures the two up/down timers for time logos
Debugging tool for the Evertz automation protocol
Debugging tool for the M2100 automation protocol
Table 3-1: Top Level of the General Setup Menu
The Select Standard menu item is used to set the video standard in use.
Select 525i/59.94 for operation with 4 x 3 aspect ratio 525i/59.94 video
conforming to SMPTE 125M.
Select 16x9 525I for operation with 16 x 9 aspect ratio 525i/59.94 video
conforming to SMPTE 125M. This setting is used where the picture has
been anamorphically compressed into a 4 x 3 raster.
Select 625i/50 for operation with 4 x 3 aspect ratio 625i/50 video conforming
to EBU TECH 3267-E.
Revision 4.2
Page 3-9
Advertisement
Table of Contents
