Table of Contents
Advertisement
3.10.5. Setting the Logo Display Time
MEDIA
Hold
Hold: manual
1 to 600
3.10.6. Setting the Logo Fade Out Duration
MEDIA
Fade Out
Fade out:30
3.10.7. Crawl Logo Configuration Items (Crawl Optioned Units Only)
When the Crawl (CWL) option is added to the 9625LG Series Keyer, it has the ability to key scrolling
text messages over the program video. In order to set up the crawl logo and enter the text for the
crawl logo you will need to use the Nomad™ or Overture™ software. The crawl is rendered by
Nomad™ or Overture™ into a logo (EVL) file and sent to the 9625LG Series Keyer. See the Nomad™
section of the Evertz Keyer Toolkit manual or refer to the Overture™ manual for more information on
preparing crawl logos.
The Media Setup menu has several items that are used to configure crawl logos, and these items are
only available when you select a crawl logo on units fitted with the crawl option. Sections 3.10.7.1 to
3.10.7.7 provide detailed information about each of the sub-menus.
3.10.7.1. Setting the Crawl Logo Horizontal Crawl Rate
MEDIA
Rate
Rate:6
1 to 15
OPERATION
9625LG Series Logo Inserters and Media Keyers Manual
This menu item is used to set how long the current logo will be displayed.
The range of values is 1 to 600 frames. The logo will automatically fade out
after the Hold time has expired. Setting the value to manual will cause the
logo to be displayed until it is manually faded out. The Hold menu item only
applies to static and crawl logos.
Use the
or
buttons to adjust the Hold value and then press the
SELECT button to make the change.
This menu item is used to set the fade out rate for the current logo. The
range of values is 1 to 600 frames. The Fade out menu item only applies to
static and crawl logos.
Use the
or
buttons to adjust the Fade Out time and then press the
SELECT button to make the change.
This menu item is used to set the speed with which the scrolling text moves
across the screen measured in samples per field. (samples per frame for
720p video formats)
For example, it will take 120 fields for the text to scroll across a 720 pixel
wide standard definition image with a scroll rate of 6. This default value of
6 should provide a comfortable rate, however, should you change the size
of the font, you should also adjust the scrolling speed.
Revision 4.2
Page 3-29
Advertisement
Table of Contents
