The Character Window Pushbutton Group; The Function Button Group - evertz 8010TM IRIG Instruction Manual

When in the Setup mode, the
in the menu system. (See also section 3.3)
When in the VCG window select mode, the arrow keys are used to position the individual
character windows on the screen. (See also section 3.6.4.)
When not in the Setup mode or the VCG window select mode, the arrow keys are used
to position all the character windows on the screen. (See also section 3.6.5.)

3.1.2. The Character Window Pushbutton Group

CHAR GEN WINDOW
window. Use the arrow keys to move the window, use the CHAR GEN ON/OFF key to
turn the window on or off. Press the WINDOW key again to select the LTC reader user
bits VCG window. Press the WINDOW key again to select the next window and so on.
The 8010TM-IRIG returns to the normal VCG display mode after the last window has
been selected.
CHAR GEN ON/OFF
mode the CHAR GEN ON/OFF key is used to turn individual windows ON and OFF.

3.1.3. The Function Button Group

VITC GEN Is used to turn the VITC generator on and off. The VITC indicator is ON when the VITC
generator is enabled. The time and user bits of the VITC generator are the same as for
the LTC generator.
DISPLAY Selects what data is being displayed on the front panel. Each time it is pressed it cycles
to the next display data. There are also some extended displays which are accessible
by pressing the SHIFT + DISPLAY keys. See section 3.2 for more information about the
front panel displays.
JAM Is used to momentarily jam the active reader's time into the generator time. When the
SHIFT + JAM keys are pressed the 8010TM-IRIG generator will be put into continuous
jam sync mode. See section 3.5.1 for information about selecting the active reader.
HOLD When the generator is displayed on the front panel, pressing the HOLD key stops the
generator time from incrementing. A special character ( H ) appears to the left of the
numeric display on the front panel, indicating that the display is in Hold mode. Pressing
the HOLD key again starts the generator incrementing.
When the Reader is displayed on the front panel, pressing the HOLD key freezes the
reader display data on the front panel and in the VCG. A special character ( F ) appears
to the left of the numeric display on the front panel, indicating that the display is in
Freeze mode. Press the HOLD key again to return to normal update mode.
STATUS Displays the current operational modes of the 8010TM-IRIG.
OPERATION
Model 8010TM-IRIG SDI Time Code Master with IRIG Reader Manual
Initiates VCG window select mode and highlights the LTC reader time VCG
Turns the character generator ON and OFF. When in the VCG window select
Revision 1.4.1
arrow keys are used to move to various items
Page 3-2