Connecting The Video; Video Inputs; Video Outputs; Table 2-6: Standard Definition Video Input Formats - evertz 9625LG Instruction Manual

Logo inserters, media keyers
Table of Contents

Advertisement

2.5.

CONNECTING THE VIDEO

2.5.1. Video Inputs

The program video source should be connected to the INPUT BNC. The 9625LG and 9625LGA
support standard definition digital video in the formats shown in Table 2-6. The HD9625LG and
HD9625LGA support high definition digital video in the formats shown in Table 2-7. The video standard
must be set manually to match the incoming video type using the Video Standard menu item on the
General menu (see section 3.6.1).
Common
Name
525i/59.94
720 x 486
625i/50
720 x 576
Common
Name
1080i/59.94
1920 x 1080
1080i/50
1920 x 1080
720p/59.94
1280 x 720

2.5.2. Video Outputs

The PROG OUT BNCs contain the video output from the program buss and should be connected to the
main broadcast chain of your plant. The FILL output is protected by a bypass relay (optional on high
definition units). When the relay is active, the PROG output is directly connected to the INPUT BNC.
If you are using your 9625LG Series Keyer as a standard on-air device then set the Output Mode menu
to Pvw/Pgm. In this mode the input video is overlaid with the logo and then output on both the KEY
and FILL BNCs. Connect one of these outputs to the next video device in your output path.
If you have a switcher or a downstream keyer that requires a separate key and fill signal for the logos,
then set the Output Mode menu to Pvw/Key/Fill. In this mode the Program Output BNCs will contain
the Logo fill data on the FILL BNC and the Logo key data on the KEY BNC. Connect these outputs to
the Key and Fill inputs of the next video device in your output path.
INSTALLATION
9625LG Series Logo Inserters and Media Keyers Manual
Pixels /
Frame Rate
Active Lines
29.97 (30/1.001)

Table 2-6: Standard Definition Video Input Formats

Pixels /
Frame Rate
Active Lines
29.97 (30/1.001)
59.94 (60/1.001)

Table 2-7: High Definition Video Input Formats

Progressive
/Interlace
I
25
I
Progressive
/Interlace
I
25
I
P
Revision 4.2
Valid Genlock
Standard
Types
SMPTE
NTSC
125M
EBU TECH
PAL
3267-E
SMPTE
Valid Genlock
Standard
Types
1080i/59.94
274M
1080p/29.97sF
NTSC
1080i/50
274M
PAL
1080i/59.94
1080p/29.97sF
296M
720p/59.94
NTSC
Page
2-7

Advertisement

Table of Contents
loading

This manual is also suitable for:

Hd9625lg9625lgaHd9625lga

Table of Contents