Table of Contents
Advertisement
3.
HOW TO OPERATE THE KEYER
USING THE RACK MOUNT CONTROL PANEL
The standard 9625LG Series Keyer is a 1 RU chassis with an integrated front control panel. The
9625LG Series Keyer is also available as a 1RU chassis with a separate 1RU rack mountable or
desktop remote control panel. This chapter describes the operation of the 9625LG Series Keyer using
either the integrated control panel or the rack mount control panel. For information about controlling
the 9625LG Series Keyer using the desktop control panel see section 4.
connecting the remote control panel to the 9625LG Series Keyer electronics see section 2.4.
When the 9625LG Series Keyer is fitted with the compact flash (+CF) option a different front panel is
fitted on the main electronics unit. This front panel provides access to insert the compact flash memory
device to allow you to quickly add or remove logos or audio clips to the system.
3.1.
AN OVERVIEW OF KEY AND DISPLAY FUNCTIONS
Figure 3-2: 9625LG with Compact Flash - Front Panel Layout
Figure 3-4: 9625LGA with Compact Flash - Front Panel Layout
Figure 3-1 to Figure 3-4 show the front panels for the standard definition keyer units. The high
definition units' front panels are identical to the standard definition units except for the model number.
The front panel controls consist of a 16 digit alphanumeric display, 16 buttons and 16 LED status
indicators.
OPERATION
9625LG Series Logo Inserters and Media Keyers Manual
Figure 3-1: 9625LG - Front Panel Layout
Figure 3-3: 9625LGA - Front Panel Layout
Revision 4.2
For information about
Page 3-1
Advertisement
Table of Contents
