Table of Contents
Advertisement
MEDIA
Bg Opacity
Bg Opacity:0-255
3.10.7.7. Setting the Crawl Logo Colours
There are two menu items used to set the text (foreground) and background colours of the crawl logo.
For the sake of simplicity only the menu item for setting the background colour will be shown in the
manual. The other menu item is used in the same way.
MEDIA
Crawl BG
R:255 G: 0 B: 0
3.10.8. Setting the Audio Clip Repeat Count (Media Keyer Units Only)
The 9625LGA and HD9625LGA Media Keyers, have the ability to insert audio clips into the program
audio path. These clips can be played by themselves or associated with logos in a playlist. In order to
set up a playlist will need to use the Nomad™ or Overture™ software. The playlist file (EKP) is sent by
Nomad™ or Overture™ to the 9625LGA Series Media Keyer. See the Nomad™ section of the Evertz
Keyer Toolkit manual or refer to the Overture™ manual for more information on preparing playlists.
MEDIA
MEDIA
CLRepeat:1
0 to 100
OPERATION
9625LG Series Logo Inserters and Media Keyers Manual
This menu item is used to set the background opacity (the inverse of
transparency) for the crawl logo.
Setting the opacity to 255 makes the background completely opaque.
Setting the opacity to 0 makes the background completely transparent.
This menu item is used to set the background colour for the crawl logo.
When you first enter this menu item you will be shown a set of colour
values for each of the RGB colour components. The display will show
something like:
R:255 G:
0 B:
To change the colour value press the SELECT button. The colon (:) after
the R will change to an equals (=) sign indicating that you can change the
R value. Use the
value. When you press the SELECT button the colon after the G will
change to an equals sign indicating that you can change the G value.
Proceed to set the G and B values in the same way. After changing the B
value, press the SELECT button and the display will show something like:
R:255 G:128 B:128
indicating that the background colour value has been changed.
This menu item is used to set the number of times the audio clip will play.
Setting the CLRepeat count to 0 will make the audio clip play out
indefinitely until a fade out command is issued.
Revision 4.2
0
or
buttons to change the red colour component
Page 3-31
Advertisement
Table of Contents
