Table of Contents
Advertisement
6.1.6. Control
Upgrade 232 Port:
9 pin female "D", RS-232 57600 baud, 8 bits, no parity
firmware upgrade
Remote Panel Port: 9 pin female "D", RS-422 9600 baud, 8 bits, no parity
Remote control panel interface (only available on RCP or DCP versions)
Serial Control Port: 9 pin female "D", RS-232/422 8 bits, no parity, baud rate depends on protocol
Selectable protocols: Automation, EAS Interface, temperature probe interface
COM D Port: (Not available on early HD9625LG units)
9 pin female "D", RS-232/422 8 bits, no parity, baud rate depends on protocol
Selectable protocols: Automation, EAS Interface, temperature probe interface
Media Transfers:
RJ-45 100Base T Ethernet, TCP/IP,
6.1.7. General Purpose Inputs and Outputs
Number of Inputs:
8, programmable control functions
Type:
opto-isolated, active low
Connector:
15 pin female High-density D
Signal Level:
Pulled up to Vext supplied voltage. 3.3V DC provided
6.1.8. Physical
Dimensions:
Electronics:
19" W x 1.75" H x 18.75" D.
(483mm W x 45mm H x 477mm D)
Rack Mount Control Panel:
(483mm W x 45mm H x 110mm D)
Desktop Control Panel:
(197mm W x 50mm H x 160mm D)
6.1.9. Electrical
Power:
Electronics:
Autoranging 100-240 VAC 50/60 Hz, 60 VA.
Optional Remote Control Panel: 12 VDC 9 watts,
Autoranging 100-240 VAC 50/60 Hz power adapter provided
Safety:
ETL listed.
Complies with EU safety directive
EMI/RFI:
Complies with FCC Part 15 Class A,
EU EMC Directive
TECHNICAL DESCRIPTION
9625LG Series Logo Inserters and Media Keyers Manual
19" W x 1.75" H x 4.25" D.
7.75" W x 2.0" H x 6.5" D.
Revision 4.2
Page 6-3
Advertisement
Table of Contents
