Table of Contents
Advertisement
9625LG Series Logo Inserters and Media Keyers Manual
3.10.7.2. Setting the Crawl Logo Repeat Count
MEDIA
Repeat
Repeat:0
0 to 30
3.10.7.3. Setting The Crawl Logo Pause Time Between Repeats
MEDIA
Pause
Pause:0
0 to 30
3.10.7.4. Setting the Crawl Logo Text Font
MEDIA
Font
Font:fontname
3.10.7.5. Setting the Crawl Logo Text Font Size
MEDIA
FontHei
FontHei:30
3.10.7.6. Setting the Crawl Logo Transparency
There are two menu items used to set the text (foreground) and background opacity (inverse of
transparency) of the crawl logo.
background opacity will be shown in the manual. The other menu item is used in the same way.
Page 3-30
This menu item is used to set the number of times the text will scroll across
the screen.
If you set the Repeat control to 0 the text will scroll continuously.
This menu item is used to set the length of time (in seconds) before a new
crawl begins. The pause time is measured between the time that the text
disappears on the left side of the screen until it appears back on the right
side of the screen.
This menu item is used to set the font that will be used for the crawl logo
scrolling text message.
When you first enter this menu branch the current font name will be shown.
To change the font to another true type font, press the SELECT button.
The display will show font=fontname indicating that the font can be
changed. Use the
or
fonts that have been loaded using the Nomad™ or Overture™ software.
When
you
press
font:fontname indicating that this is the new the display font.
This menu item is used to set the font size that will be used for the crawl
logo scrolling text message.
The FontHei is the vertical size of the font measured in lines of video.
For the sake of simplicity only the menu item for setting the
Revision 4.2
buttons to select the from the available true type
the
SELECT
button
the
display
will
show
OPERATION
Advertisement
Table of Contents
