The Function Button Group; The Preset Button Group - evertz HD9010TM-IRIG Instruction Manual

Hdtv time code master with irig-b reader

Table of Contents

When not in the VCG Window Select Mode, press this key and turn the SHAFT ENCODER

knob to position all the character windows vertically on the screen. (See also section 3.6.4.)

3.1.5. The Function Button Group

ANC GEN Is used to turn the RP188 Ancillary time code (ATC) generator on and off. The ANC GEN

indicator is ON when the RP188 generator is enabled. The time and user bits of the RP188

generator are the same as for the primary LTC generator.

JAM

Is used to momentarily jam the active reader's time into the generator time. When the

SHIFT + JAM keys are pressed the HD9010TM-IRIG generator will be put into continuous

jam sync mode. See section 3.5.1 for information about selecting the active reader.

HOLD

When the generator time (GTM) is displayed on the front panel, pressing the HOLD key

stops the generator time from incrementing. A special character ( H ) appears to the left of

the numeric display on the front panel, indicating that the display is in Hold mode. Pressing

the HOLD key again starts the generator incrementing.

When one of the readers is displayed on the front panel, pressing the HOLD key freezes the

reader display data on the front panel and in the VCG. A special character ( F ) appears to

the left of the numeric display on the front panel, indicating that the display is in Freeze

mode. Press the HOLD key again to return to normal update mode.

SAVE

Is used to save the current configuration of the HD9010TM-IRIG into one of the user preset

memories. The Front panel prompts you to enter the preset number you want to load

Use the numbered keys to select the preset memory to save into. The front panel shows

the preset memory to save to, and the current video standard.

To select another preset memory press one of the numbered keys. To confirm saving the

preset press the SELECT key. The front panel shows

OPERATION

HD9010TM-IRIG HDTV Time Code Master / IRIG-B Reader Manual

Save Preset

Sv 3 AUTO-I/60 ?

Sv 3<AUTO-I/60

Revision 2.1

Page 3-3

Table of Contents