The Setup Button Group - evertz 9590 Instruction Manual

Models 9590 & HD9590 Graticule Generator Manual
MASK Pressing this button selects and turns on the mask object
CURSOR Pressing the button once selects and turns on the first cursor object. Pressing the button a
second time selects and turns on the second cursor object
BOX Pressing the button once selects and turns on the first box object. Pressing the button a
second time selects and turns on the second box object
CIRCLE Pressing this button selects and turns on the circle object
ON/OFF This button turns a particular object ON or OFF. If the object is set to ON you will see it in
the output video. If the object is set to OFF you will not see it in the output video.
The ON/OFF status of each object is stored individually. You must select the object before
you can change its ON/OFF status.
MODE This button controls various MODES for a particular object such as the aspect ratio and
whether it is centred on the screen on not.
determined by the setup menu items, and may be hidden if they are not applicable. You
must select the object before you can change its MODE.
CTRL SEL This button controls which attributes for a particular object (white level, position, size or
shape) will be adjusted by turning the shaft encoder knobs. Some of the object controls are
affected by the setup menu items, and the object mode, and may be hidden if they are not
applicable. You must select the object before you can change its CTRL SELection.
LOCK Pressing the LOCK button initiates a global panel lock. All front panel controls except the
LOCK button are inhibited when LOCK is enabled.
PANEL. LOCKED LED illuminates. Pressing the LOCK button will toggle the LOCK state
ON and OFF.
KEYER ON/OFF Pressing this button allows the user to toggle the global KEYER state ON (enabled)
and OFF (disabled). When the KEYER is ON all enabled objects will be present in the
video output. When the KEYER is OFF none of the enabled OBJECTS will be present in
the video output.

3.1.2. The Setup Button Group

SETUP Pressing this button allows you to program various global attributes for the objects, and to
configure the overall operating modes for the Graticule Generator. See section 3.2 for a
complete description of the setup modes.
ESC This button is used to exit out of menus or to abort setup operations.
Page 3-2
Some of the MODES are automatically
When the panel is LOCKED the
RACK MOUNT PANEL OPERATION