Table of Contents
Advertisement
9625LG Series Logo Inserters and Media Keyers Manual
4.3.
AN OVERVIEW OF THE SETUP MENU SYSTEM
The SETUP menu system uses the 16 digit alphanumeric display and provides a quick, intuitive method
of configuring the 9625LG Series Keyer. These items are often only required to be set up at installation
time, and do not pertain to the day-to-day operation of the unit. Figure 3-5 provides an overview of the
Setup menu system.
4.3.1. Navigating The Setup Menu
To enter the Setup menu, press the SETUP button. This will bring you to the main Setup menu where
you can use the SHAFT ENCODER to move up and down the list of available sub-menus. Top level
menu items are shown in UPPERCASE. Once you have chosen the desired sub-menu, press the
SELECT button to select the next menu level.
Once in a sub-menu, there may be another menu layer (shown in Title Case), or there may be a list of
parameters to adjust (shown in lower case). If there is another set of menu choices, use the SHAFT
ENCODER to select the desired menu item and press the SELECT button. Continue this process until
you get to the bottom of the menu tree where the list of parameters to be adjusted is shown.
To adjust any parameter, use the SHAFT ENCODER to move up or down the parameter list to the
desired parameter. To view the possible values for that item, press the SELECT button. The current
value for that parameter will be shown with an asterisk (*). Turning one of the SHAFT ENCODERS
allows you to show the possible values for the selected parameter. The various parameter values that
are not currently selected will NOT have an asterisk (*). When you have stopped at the desired value,
press the SELECT button to save your selection.
The value will be shown with an asterisk (*)
indicating that it is now the current value. To move up one level in the menu, press the SETUP button.
You can select other parameters from that sub-menu by using the SHAFT ENCODER, followed by the
SELECT button. Alternately you can move up one menu item by pressing the SETUP button.
When you have made all the desired changes, press the SETUP button one or more times until you
return to the top of the Menu tree and exit the Setup menu.
Each of the menu items, with function explanations, are described in sections 3.5 to 3.10.
Page 4-6
DESKTOP CONTROL PANEL
Revision 4.2
Advertisement
Table of Contents
