Table of Contents
Advertisement
9625LG Series Logo Inserters and Media Keyers Manual
GENERAL
COM D
None
EAS CG
Temperature
Automation
Control Panel
Console
M2100_AUTO
XY_AUTO
3.6.6. Protecting Line 21 Captions
GENERAL
Line 21 Protect
L21 prot: No
L21 prot: Yes
Page 3-16
This menu item allows you to set the communications protocol that will be
used on COM port D.
Select None to disable the use of the COM D port.
Select EAS CG when you have the EAS option (+EAS) enabled and have
an EAS decoder connected to port D. See section 5.1 for more information
about connecting the EAS decoder.
information about configuring the EAS functions of the keyer.
Select Temperature when you have the optional temperature probe
connected to the port.
connecting the temperature probe. The temperature is displayed using a
preformatted temperature logo, which is created using the InstaLogo™ or
Overture™ software. See the InstaLogo™ section of the Keyer Toolkit
manual, or refer to the Overture™ manual, or the Temperature Probe
addendum (which was shipped with your temperature probe), for
information on creating the Temperature logo.
The Control Panel and Console functions are dedicated to ports B, A
respectively and cannot be selected for COM D. These items are included
for information purposes only.
There are four settings that are used when the keyer is under automation
control. See your automation vendor for information about the protocols
that are supported.
Select AUTOMATION when you want to control the keyer using the Evertz
automation protocol. This is the setting you should use when you are
controlling the keyer from the Evertz MetaCast software.
Select M2100_AUTO when you want to control the keyer using the Grass
Valley M2100 switcher automation protocol.
Select XY_AUTO when you want to control the keyer using the xy logo
inserter automation protocol.
This menu item allows the user to control whether logos can be placed on
line 21 where closed captions are located in North American television
systems. When the video standard is set to one of the 625 line standards,
the setting of this menu item is ignored.
When set to No, logos can be placed vertically beginning at line 21.
When set to Yes, logos can be placed vertically beginning at line 22,
preserving any closed caption information that is encoded on line 21.
Revision 4.2
See sections 5.2 and 3.9 for
See section 2.10 for more information about
OPERATION
Advertisement
Table of Contents
