Front Panel Assembly
The front-panel assembly must be removed from the Test Set's chassis
before any of the front panel subassemblies can be removed.
1. Remove the external and internal covers, see
2. Remove the cables, BNC nuts, and 6 screws securing the front panel
3. See
Figure 3-15
Front Panel Assembly
CORE_SHIELD_BEAD_AY
NUT-HEX-DBL-CHAM (Qty. 3)
Covers" on page
87.
frame to the Test Set's chassis, see
Figure 3-16 on page 100
removal.
Disassembly and Replaceable Parts
"External and Internal
,
Figure
3-15.
to identify the desired subassembly for
SMM4.0_10SEMPNTX (Qty. 6)
Disassembly Procedures
99