Agilent Technologies E8285A Manual page 69

Time-outs
Certain failures may cause a frequency or voltage reading to time out, that is, the
time required for the measurement will be unreasonably long. If a timeout occurs,
measurement execution will stop and an error message will be displayed.
• If frequency or voltage readings have been successfully made before the
• If most measurements fail, the Reference assembly may be supplying faulty
• Re-run the test to see if the timeout is intermittent.
timeout, the assembly currently being tested or a multiplexer on the
Measurement assembly may be at fault.
clock signals to the Measurement assembly.
Frequently Encountered Diagnostic Messages
Troubleshooting
69