3. On the Test Set:
4. Record the Chan Pwr measurement in the PTR
5. Repeat steps 2 and 3 for each of the data points listed in the PTR.
6. For PCS frequencies:
The Chan Pwr Cal is only required when the frequency is changed.
NOTE
CDMA Analyzer Channel Power Level Accuracy Performance Test 29
a. Press
.
Preset
b. Change the Avg Pwr field to Chan Pwr.
c. Verify the RF Channel is set at 384.
d. Select Calibrate under Chn Pwr Cal.
Channel Power Level Accuracy Test 29 Record" on page
a. Set the RF CHAN Std to US PCS.
b. Verify the RF Channel is set at 525.
Performance Tests
table 7-30, "CDMA Analyzer
247.
199