Agilent Technologies E8285A Manual page 154

Performance Tests
RF Generator FM Flatness Performance Test 3
5. On the measuring receiver:
6. On the Test Set, for frequencies of 1700 and 2000 MHz, measure the FM
154
a. Set the frequency offset mode to enter and enable the LO frequency (27.3
Special).
b. Key in the LO frequency (in MHz) which is 1500.
deviation at the rates shown in the PTR. Convert the measurement results as
was done in step 3 and compare the calculated deviation to the limits.
S:\agilent\e8285\ALR\Book\chapters\perf_test.fm