Agilent Technologies E8285A Manual page 112

Functional Verification
Purpose
Purpose
The purpose of this chapter is to provide loopback self-tests and mobile phone
test procedures that quickly verify the functional performance of the Test Set
while racked in a test system or operating stand-alone. If racked in a test
system, removing the Test Set should be avoided if all functional performance
tests pass. Performing and passing all tests will result in a very high level of
confidence that the Test Set is functioning properly. This document is not
intended to provide complete troubleshooting instruction for hardware
failures.
The desired results of the following procedures are:
• To isolate the cause of test system problems quickly if related to the Test
Set
• To minimize unnecessary Test Set swapping
• To identify the root cause of poor test system yields if related to the Test Set
• To improve user test system quality confidence level
•
To educate current and new production technicians on Agilent Technologies
products
112
S:\agilent\e8285\ALR\Book\chapters\verif.fm