Introduction
Test Equipment Needed for the System Power Calibration Program
Test Equipment Needed for the System Power
Calibration Program
For the System Power Calibration program you will need the
equipment listed in
written specifically for this equipment, no substitutions are possible.
Table 1-1
Equipment List for System Power Calibration Program
Equipment Type
Signal Generator
Power Meter
Power Sensor
Power Splitter
GPIB Cables (2 cables required, 3 if
GPIB printer is used.)
Printer (optional)
40
S:\agilent\e8285\ALR\Book\chapters\intro.fm
table
1-1. Because this calibration program is
Agilent Technologies
Model Number
8648B Option 1EA
436A
437B
438A
EPM-441A
EPM-442A
8901B
8902A
8482A
ECP-E18A
11722A
11667A
Any GPIB cable
Any serial, parallel, or GPIB printer