Table of Contents
Advertisement
PRO165SL/SLE
3.1. Motor and Feedback Connectors
Stages equipped with standard motors and encoders come from the factory completely wired and
assembled.
IMPORTANT: Refer to the other documentation accompanying your Aerotech
equipment. Call your Aerotech representative if there are any questions on system
configuration.
IMPORTANT: If you are using standard Aerotech motors and cables, motor and
encoder connection adjustments are not required.
The protective ground connection of the PRO165SL/SLE provides motor frame ground protection
only. Additional grounding and safety precautions are required for applications requiring access to
the stage while it is energized. The System Integrator or qualified installer is responsible for
determining and meeting all safety and compliance requirements necessary for the integration of
this stage into the final application.
DANGER: Electrical Shock Hazard!
The protective ground connection must be properly installed to minimize the
l
possibility of electric shock.
The stage controller must provide over-current and over-speed protection. Failure to
l
do so could cause electric shock or damage to the equipment.
34
Hardware Manual
www.aerotech.com
Advertisement
Table of Contents
