Eu Declaration Of Incorporation - Aerotech PRO165SLE Hardware Manual

PRO165SL/SLE

EU Declaration of Incorporation

Manufacturer
herewith declares that the product:
is intended to be incorporated into machinery to constitute machinery covered by the Directive 2006/42/EC
as amended; and that the following harmonized European standards have been applied:
and further more declares that
This is to certify that the aforementioned product is in accordance with the applicable requirements
of the following directive(s):
Authorized
Representative:
Engineer Verifying
Compliance
Date
6
Aerotech, Inc.
101 Zeta Drive
Pittsburgh, PA 15238-2811
USA
PRO165SL/SLE stage
EN ISO 12100:2010
Safety of Machinery - Basic concepts, general principles for design
EN 60204-1:2010
Safety of Machinery - Electrical equipment of machines - Part 1: General
requirements
it is not allowed to put the equipment into service until the machinery into which it is to
be incorporated or of which it is to be a component has been found and declared to
be in conformity with the provisions of the Directive 2006/42/EC and with national
implementing legislation, for example, as a whole, including the equipment referred
to in this Declaration.
Directive, Restricted Substances (RoHS 3)
EU 2015/863
Managing Director
Aerotech GmbH
Gustav-Weißkopf-Str. 18
90768 Fürth
Germany
Aerotech, Inc.
101 Zeta Drive
Pittsburgh, PA 15238-2811
USA
7/20/2023
/ Norbert Ludwig
/ Alex Weibel
Hardware Manual
www.aerotech.com