Table of Contents
Advertisement
Hardware Manual
Installation and Operation
To decrease the risk of damage to the equipment, you must obey the precautions that follow.
DANGER: General Hazard Warning!
This product can produce high forces and move at velocities that could cause injury.
The user is responsible for its safe operation. The following general equation is
provided to assist with risk assessments in regards to contact and pinch points:
WARNING: General Hazard Warning!
Only trained operators should operate this equipment.
l
All service and maintenance must be done by approved personnel.
l
Use this product only in environments and operating conditions that are approved in
l
this manual.
Never install or operate equipment that appears to be damaged.
l
On stages with BMS motors: the motor over-temperature sensor must be monitored
l
by the drive. Use it to shut down the drive if the motor overheats.
Make sure that the product is securely mounted before you operate it.
l
Make sure that all pneumatic lines are securely connected.
l
Use care when you move the stage or you could negatively affect the performance of
l
it.
WARNING: Trip Hazard!
Route, house, and secure all cables, duct work, air, or water lines. Failure to do so could
introduce trip hazards around the system that could result in physical injury or could
damage the equipment.
www.aerotech.com
PRO165SL/SLE
9
Advertisement
Table of Contents
