Advertisement
custom-privileges administrator with the Network/Interface privilege as well.
Logging in to the Machine as a Custom-Privileges Administrator
2. On the Home screen, press [Settings].
3. Press [System Settings].
4. Press [Network/Interface]
5. From the list next to each unused protocol, select [Inactive].
6. Press [OK].
7. Press [Home] (
Section Top
Disabling Unused Protocols Using Web Image Monitor
1. Log in to the machine as the machine administrator from Web Image Monitor.
Logging in to the Machine as an Administrator
When custom-privileges administrators are registered, you can log in to the machine as a
custom-privileges administrator with the Security privilege as well.
Logging in to the Machine as a Custom-Privileges Administrator
[Effective Protocol].
), and then log out of the machine.
Advertisement
