Advertisement
Paper is jammed.
An original has jammed.
Toner is almost depleted, or has run
out.
The waste toner bottle is full, or almost
full.
Staples are nearly depleted, or have
run out.
The hole punch receptacle is full.
A cover is open.
See the animated illustration displayed
on the control panel, and remove the
jammed paper.
When Paper or an Original Is
Jammed
See the animated illustration displayed
on the control panel, and remove the
jammed original.
When Paper or an Original Is
Jammed
Prepare a replacement toner. Replace
the toner when it runs out.
Replacing the Toner
If
appears when there is a lot
of toner, pull out the print cartridge
by following the toner replacement
procedure that is displayed on the
screen, and then set it back again.
Prepare a replacement waste toner
bottle.
Replace the bottle when it becomes full.
Replacing the Waste Toner Bottle
Prepare a cartridge for replacement,
and load it when the staples run out.
Replenishing the Staples
Empty the receptacle.
When the Hole Punch Receptacle
Is Full
Check that all covers of the machine
and external devices are closed.
Advertisement
