Advertisement
5. Press [Supervisor].
6. Enter the login user name for Login User Name.
7. Press [Change] next to Login Password.
8. Enter the login password for New Password.
9. Enter the login password for Confirm New Password again.
10. Press [OK] twice.
11. Press [Close].
12. Press [OK].
When settings are complete, the machine logs you out automatically.
For the characters that can be used for login user names and passwords, see Usable
Characters for User Names and Passwords.
Section Top
Changing the Password of a Built-in Administrator
Only the supervisor has the privilege to change the password of the built-in administrators. If
a built-in administrator forgets the password or wants to change the password, the supervisor
must reset the password.
Refer to the provided guide for the default login user name and login password of the
supervisor.
Do not forget the login user name and login password of the supervisor. If you forget
these, you have to restore the factory default settings, which will result in loss of data.
1. Log in to the machine as the supervisor on the control panel.
Logging in to the Machine as an Administrator
Advertisement
