Advertisement
8. After checking the connection with the LDAP server, set the search conditions or key
display name.
Search Conditions: Specify the Name, Email Address, Fax Number, Company Name,
Department Name, and Group attributes as keywords for search conditions. Enter the
Name, Email Address, Fax Number, Company Name, and Department Name attributes
using up to 64 characters; and the Group attribute using up to 128 characters. Confirm
and specify the server environment to be used. Because attributes are used for searching
in the Address Book of the LDAP Server, a search is disabled if attributes are left blank.
Search Options: Specify [Attribute] and [Display Name] according to the server you are
using.
Attribute: Enter the attribute for optional search conditions as necessary. For
example, to search using the employee number, register "employeeNo" as an
attribute. Once search options are stored, register the key display names.
Display Name: Enter the display name of the column in which search options are
entered. For example, if the search option is the employee number, register
"employeeNo".
9. Press [OK].
10. Press [Close].
11. Press [Home] (
To change/delete the stored LDAP server, select the desired LDAP server name, and then
press [Register/Change] or [Delete].
Configuring the Authentication Server | Registering the Realm
Copyright © 2023
), and then log out of the machine.
Page Top
Advertisement
