Advertisement
Service Mode Lock
SSD Authentication Code
CCC: Save Standard Values
CCC: Apply Standard Values
Credential Storage
Server Settings
Install Settings
Specifying the Extended Security Functions
Specify whether to lock the machine changing to Service
Mode when a customer engineer performs maintenance and
repair.
Default: [Off]
Restricting Operations of the Customer Engineer without
the Supervision of the Machine Administrator
Enter the Authentication code of the Solid State Drive (SSD)
of the machine within the range of 8 to 32 characters.
Changing the SSD Authentication Code
Store or reflect the Device Settings (reference value) for the
International Evaluation Regulations for Information Security
(CC Authentication) in the internal storage of the machine.
When you change the settings for maintenance of the
machine, backup and restore the settings before and after
maintenance, and the device settings to satisfy the CC
Authentication standards can be kept.
System (certificate system installed)
Displays the contents of certificates installed in the
system. Specify whether to use these certificates.
User (certificate installed from SD card)
Install certificates from a USB flash memory device. You
can install up to 10 certificates.
Delete All Certificates
Deletes all contents of the installed certificates.
Specify whether to enable the server function for operating
the Web application. You can install a server certificate for
SSL communication.
Default
Server Function: [Active]
Setting Server Certificate: [The setting has not
been made.]
Specify whether to allow installation of the application with
the SHA-1 signature.
Default: [ON]
Advertisement
