Advertisement
3. Click [User Lockout Policy] in the "Security" category.
4. Specify the number of login password attempts to permit before locking out the
user and the period of time until the lockout is automatically released.
th
Lockout (n Time)
Select [Active], and then specify "Number of Attempts before Lockout" from 1 to 10.
Lockout Release Timer
Select [Active] to release the locked-out state after a specified time elapses, and
then enter the desired value in "Lock Out User for" up to 9999 minutes (about seven
days).
Release Lockout When Restarting and Rebooting System
Specify whether to activate the lockout release function by restarting the machine.
The supervisor and administrators are subject to the lockout release function.
It takes about 60 seconds for the locked-out state to be actually released after the
machine restarts.
5. Click [OK].
6. Log out of the machine, and then exit the Web browser.
Section Top
Releasing the Locked-out State
When a general user is locked out, the user administrator must log in and release the locked-
out state.
1. Log in to the machine as the user administrator from Web Image Monitor.
Logging in to the Machine as an Administrator
2. Click [Address Book] on the [Device Management] menu.
3. Select the locked-out user's account, and then click [Change] on the [Detail Input]
tab.
4. Select [Inactive] on "Lockout" of "Authentication Information".
5. Click [OK].
6. Log out of the machine, and then exit the Web browser.
When an administrator is locked out, the supervisor must log in to the machine and
release the locked-out state. When the supervisor is locked out, the machine
administrator must log in to the machine and release the locked-out state. Click [Device
Management]
Program/Change Administrator screen, and then release the locked-out state.
[Configuration]
[Program/Change Administrator] to display the
Advertisement
