Advertisement
Section Top
Changing the Login Password by Using Web Image Monitor
Only the administrator can change the user code. To change the user code, log in to Web
Image Monitor as an administrator.
1. Launch the Web browser.
2. Enter "http://(IP address of the machine or host name)/" on the address bar of the
Web browser, and then press the Enter key.
3. Click [Login].
4. Enter the login user name and password, and then click [Login].
5. Click [Address Book] on the [Device Management] menu.
6. Select the user for whom to change the login password.
7. Click [Change].
8. Click [Change] in "Login Password" of "Authentication Information".
9. Enter the new password in [New Password], and then re-enter the password in
[Confirm Password].
10. Click [OK] three times.
Section Top
Advertisement
