Advertisement
Action on Receiving File
Specify the output method of the received document.
Store: Store documents on the machine
When [On] is selected, specify whether to notify that the
document is stored and that memory is nearly full in
[Store Notification Settings].
Default: [Off]
Forwarding: Forward the document to a pre-registered
destination
When [On] is selected, specify the forwarding
destination, security, etc. in [Forwarding].
Default: [Off]
Print: Print the document automatically
Default: [On]
Memory Lock Reception: Perform Memory Lock
Reception that requires entering the Memory Lock ID to
print
Default: [Off]
When [On] is specified for Store, more memory space is
used as the number of saved documents increases.
After memory space becomes insufficient, no more
documents are saved on the internal storage. Based on
the bit number 7 setting of the switch number 10, the
machine prints and deletes the stored documents
starting from the one with the oldest stored date; or
deletes them without printing and prints the Reception
File Erased Report. When memory space becomes
insufficient, delete the stored documents.
When [On] is specified for Store, you can specify the
parameter setting (the bit number 0 of the switch
number 40) to stop the machine automatically receiving
new faxes when available memory space runs too low.
Overview of Output Mode Switch Timer
Configuring the Machine to Store Received Documents
Transferring Received Fax Documents to Another Fax by
Forwarding
List of Parameter Settings
Advertisement
