Advertisement
Output Mode Switch Timer
Prohibit Auto Print
Print Standby to Print Files
Action on Receiving File when a
Memory Is Full
Reception File Storage Location
Create / Change / Delete Reception
File Store Folder
Specify the output method of documents received during the
specified time period from Print, ID Required Print,
Forwarding, or Store.
Default: [Do not Use]
Configuring Output Mode Switch Timer
Store the document as a standby to print document without
printing it automatically.
Default: [Do not Prohibit]
Overview of Output Mode Switch Timer
Select this to print a standby to print document designated by
[Output Mode Switch Timer] and [Prohibit Auto Print].
Confirming the Output Mode that is Applied Automatically
Specify whether to delete the oldest received document or
cancel receiving new documents when the internal storage of
the machine is full. When you select [Delete Old File and
Receive New File], also specify whether to print the old
document or print a report without printing the document.
Default
Receiving When Memory Is Full: [Delete Old File
and Receive New File]
When Deleting Old File: [Print Old File]
Configuring the Machine Behavior When a Document
Cannot Be Stored
This setting is available when [Store] is enabled in [Action on
Receiving File].
Received documents are stored on the internal storage and
in the fax memory of the machine as well. When [Reception
File Storage Location] is set to [Internal Storage], the
machine stores received documents on its internal storage
even after the fax memory becomes full, thus enabling you to
store more documents.
Default: [Fax Memory]
Register, modify or delete a folder to store received
documents.
Advertisement
