Advertisement
You can reduce communication costs because no call charges are incurred.
You can communicate faster over an IP network compared to an analog phone line. Also,
it does not require an e-mail server to relay the message, so you can send and receive
documents without any delay.
This function is suitable for communicating between devices in the same local area
network such as your company intranet.
You can send a fax to a G3 fax by relaying the communication from the machine through
a VoIP gateway to a public telephone line.
IP-Fax supported by this machine is ITU-T Recommendation T.38 compliant.
To send to a G3 fax via a gateway connected to a public telephone line, you must specify
it's the receiver's machine telephone number. For example, if the receiver's fax number is
"0312345678", specify "5678". To send from an IP-Fax to G3 fax without using
gatekeeper or SIP server, you must register the gateway also.
An alias telephone number is a number that is registered in the gatekeeper, and is
available only in the network to which the gatekeeper is connected.
Pay attention to the number of telephone number digits set in the gateway/IP address
conversion table to avoid transmission error.
Although the machine can have multiple IP addresses in an IPv6 environment, only one
address can receive IP-Faxes.
Section Top
Internet Fax
Documents are sent and received via an Internet connection between devices that support
Internet Fax. When sending a fax, specify the destination by entering its e-mail address. The
document is sent as an attachment in an e-mail. You can use this function to send and
receive faxes between the machine and an other manufacturer's device that supports Internet
Fax.
Sending and Receiving Documents by Internet Fax
Using this function, you can also send a fax to a computer.
No call charges are incurred, and you can reduce communication costs especially when
sending a fax to a destination in a remote location.
Advertisement
