Advertisement
1. Log in to the machine as the machine administrator from Web Image Monitor.
Logging in to the Machine as an Administrator
When custom-privileges administrators are registered, you can log in to the
machine as a custom-privileges administrator with the Data Management privilege
as well.
Logging in to the Machine as a Custom-Privileges Administrator
2. Click [Configuration] on the [Device Management] menu.
3. On the "Configuration" screen, click [Logs] in the "Device Settings" category.
4. Under "Common Settings for All Logs", select [Inactive] of "Transfer Logs",
and then click [OK].
5. Log out of the machine, and then exit the Web browser.
Section Top
Operating the Machine Giving Priority to Job Log Maintenance
When job logs cannot be transferred to the log collection server, or when the number of logs
stored in the machine approaches the upper limit, a notification message is displayed on the
control panel of the machine and notification is sent to the administrator by e-mail. When the
number of logs stored in the machine reaches the upper limit, the machine stops executing
new jobs to prevent losing logs.
Specifying the setting using the control panel
Advertisement
